Build your own Christmas Baubles

FOUR LEGO CHRISTMAS BAUBLES TO MAKE (WITH BUILDING INSTRUCTIONS!)

Christmas is coming, the shops are getting busy and you will be thinking about when to get the Christmas tree down, we have some fantastic blogs that show you how to make your own LEGO® baubles!  

Here are five fun designs for trimming your tree.  

Build a Nutcracker, a Penguin, a Gingerbread Man, a Candy Cane, and a Tree.  

Below are instructions and parts lists for each of the items above.  If your kids don’t have the exact pieces or colors we used, encourage them to get creative with what they have.  

Christmas Tree

For the tree, you will need:

4 – 4 x 4 green corner plates

3 – 2 x 4 green wedge plates, right

3 – 2 x 4 green wedge plates, left

1 – 2 x 3 brown plates

1 – 2 x 2 brown plate

1 – 2 x 2 yellow plate with a curved end and a hole

1 x 1 round plates in various colors for ornaments

The trunk is a 2 x 2 brown plate on top of a 2 x 3 brown plate, and it attaches to the back of the tree.

Candy Cane

To build the candy cane, you will need:

2 – 2 x 2 white slopes

6 – 2 x 2 white bricks

1 – 2 x 6 red brick

5 – 2 x 2 red bricks

Just hang the candy cane over a tree branch.

Gingerbread Man

Here’s what you need to make one:

1 – 4 x 4 brown round brick

4 – 1 x 4 brown bricks, modified log

3 – 1 x 2 brown bricks, modified log

2 – 2 x 6 brown plates

1 – 1 x 2 brown plate with one stud on top

2 – eyes

3 – 1 x 1 white round plates

1 – 1 x 1 red round plate

1 – 2 x 2 plate with a curved end and a hole

Step 1:  Attach the brown bricks to a 2 x 6 brown plate as shown.  The log modified bricks make it possible to angle the arms and legs slightly.

Step 2:  Add the second 2 x 6 plate on top of the body.  Attach the red nose to the 1 x 2 plate with one stud on top and add it to the face.  Add the eyes and white buttons.

Santa Hat Penguin

To build one you will need:

3 – 1 x 4 black bricks

2 – 1 x 3 black bricks

1 – 1 x 2 black brick

2 – 1 x 2 black inverted slopes

4 – 1 x 1 black bricks with a stud on the side

1 – 2 x 3 black plate

1 – 2 x 2 black plate

1 – 1 x 2 black plate

1 – 1 x 2 black plate with one stud on top

2 – 1 x 1 black slopes, 30 degree

2 – 1 x 2 black slopes, 2 bricks high

1 – 2 x 4 white plate

2 – 2 x 2 white bricks

1 – 2 x 2 white plate

1 – 2 x 2 white slope

1 – 2 x 2 white slope, inverted

1 – 1 x 1 white round plate

1 – 1 x 4 red plate

2 – 2 x 2 red plates

3 – 1 x 2 red plates

1 – 1 x 3 red plate

1 – 1 x 2 red slope, 30 degree

1 – 1 x 2 red plate with one stud on top

1 – 1 x 2 red curved slope

1 – 2 x 3 orange wedge plate, right

1 – 2 x 3 orange wedge plate, left

1 – 1 x 2 orange curved slope

2 – eyes

1 – 2 x 2 light gray plate with a curved end and a hole

Step 1:  Gather the pieces shown for building the penguins feet and body.

Step 2:  Attach a 2 x 4 white plate to two 2 x 3 orange wedge plates.  Then add the other bricks.

Step 3:  Add two 1 x 3 black bricks, a 1 x 2 black brick, and a 2 x 2 white brick.

Step 4:  Place a 2 x 2 white brick and then a 2 x 2 white slope on the front.  Add two 1 x 4 black bricks to the back, and put a 1 x 2 black slope (2 bricks high) on each side.

Step 5:  Build the penguin’s scarf with a 1 x 4 red plate and two 1 x 2 red plates.  Or just use a 2 x 4 plate – I couldn’t find one!

Step 6:  Add a 2 x 2 black inverted slope, a 2 x 3 plate, and a 1 x 2 plate with one stud on top.

Step 7:  Add four 1 x 1 bricks with a stud on the side.  Two are for the eyes, and two are on the back of the head (to hold the brick that will hold the string).  Add a 1 x 2 orange curved brick for the beak.

Step 8:  Add a 2 x 2 black plate on top of the penguin’s head.  Then add a 1 x 2 black plate and two 1 x 1 slopes to the back of the neck.

Step 9:  Build the hat.  Add a 2 x 2 white plate, then two 2 x 2 red plates.  Then add a 1 x 2 slope and a 1 x 2 plate with one stud on top.  The pieces to build the scarf and the point on the hat are shown below.

Step 10:  Attach a 2 x 2 light gray plate with a hole on the end to hold the string.  You’ll need to add the string before attaching the brick to the penguin.

The completed penguin

You can see our other Christmas projects here:

Nutcracker - Separate post due to step by step instructions